Keep Your Sewage System in Tip-top Condition

Septic Tank (ThoughtBubble)


Ultimately, maintaining your sewage system will save you money in the long run. In accordance with manufacturers’ recommendations, regular maintenance and repair work should be undertaken and may cost roughly between £200 and £300 annually, whereas replacing a damaged system can incur a one off cost up to £14,000.


Look – check for pooling of wastewater or muddy ground surrounding your sewage system. Also, check for your sink and toilet backing up.

Smell – check for odours of sewage or a ‘rotten egg’ smell around your system or even in your basement or cellar.


Be water conscious – the volume of water your tank can hold will determine how often you need to empty it. If your tank holds less than 1000 gallons it will fill up faster and require servicing more regularly, therefore monitoring your water usage can greatly improve your systems working capacity.

Protect your tank – try not to put anything heavy on the ground over or around your tank or soak-away such as a shed, parked car, above ground pool or hot tub. This can compromise the effectiveness of the soak-away.

Only flush biodegradable products – ideally only toilet paper and waste water should be flushed down your toilet; try not to flush anything non-biodegradable or chemicals. Flushing solids down your toilet can clog the tank and soak-away and chemicals can kill bacteria that help break down solids.

Finally… Consult the Experts! – SepticTanksAndCesspits offer a comprehensive maintenance & repair service, providing inspections and pump repairs in order to ensure your sewage system is running smoothly.

The Easy Way To Get Your Septic Tank Emptied

Booking your sewage clearance could not be simpler with Septic Tanks and Cesspits!

Watch our new video to see just how easy it is.

New: Update on Registration of small sewage discharges from Septic Tanks & Sewage Treatment Plants

Further to the original Environment Agency permit registration scheme that was suspended in 2011, DEFRA has published a consultation on changes to the regulation of small sewage discharges or SSD’s.

The new proposals will affect all owners of septic tanks and sewage treatment plants and will place limits on the location, volume and type of discharge for septic tank and sewage treatment plant installations.

Click here to find out more.

Septic Tank and Cesspit Emptying Costs

The true cost of maintaining your sewage system.

You can find a lot of information surrounding the cost of maintaining and emptying septic tanks or cesspits; especially on the internet. If you are thinking of buying or moving to a property which is off-mains drainage, you will naturally be keen to understand the types of sewage systems out there and the costs involved in emptying and maintaining them. In this article, we will hopefully dispel some of the myths and help set your mind at ease.

We’ll start with an overview of the most common sewage systems in use.

In the past, there was really only ever one option for off-mains sewerage – a cesspit. A cesspit is simply a sealed holding tank for household wastewater and requires emptying at regular intervals, dependent upon the size of the tank and the number of people living at the property. A cesspit or cesspool is not designed to treat the wastewater and sewage in any way – it simply stores the waste.

The next option is a septic tank. A septic tank normally comprises of two chambers.

As sewage and wastewater enter the first chamber, any solids are ‘encouraged’ to settle at the bottom where they will be decomposed by the septic bacteria through anaerobic digestion. A crust will also form on the surface; ensuring the perfect environment for the bacteria to survive. Meanwhile, the liquors will flow into the secondary chamber, where smaller suspended particles are again encouraged to settle before the liquors finally exit the tank through to the soak away system and into the surrounding environment where any residual impurities are trapped and eliminated in the soil.

Of course, any discharge into the local environment is subject to a ‘consent to discharge’ issued by the Environment Agency. Septic Tanks do not require full emptying, however, they do need to be regularly ‘de-sludged’. This process involves removing the solids or sludge from the system but ensuring that enough bacteria-laden water remains for the system to continue to operate effectively.

Finally, we have the Sewage Treatment Plant. The sewage treatment plant process is similar to the way that a septic tank works but mechanical components help break down liquid waste to produce a much cleaner, more environmentally friendly effluent.

Wastewater and sewage are fed into the primary settlement tank where solids and liquids separate and the liquor flows into the ‘biozone’ chamber. In this chamber, a pump aerates the waste and encourages good bacteria to digest the organic matter; breaking it down and purifying it.

As it leaves the final chamber, (known as the humus chamber), the effluent is typically 95% clean and ready for discharge into local watercourses, ditches or land drainage systems; again, subject to consent from the Environment Agency.

As well as a regular emptying cycle, (normally at least once a year), a sewage treatment plant needs to regularly serviced and maintained, in accordance with the manufacturer’s recommendations, in order to keep the mechanical components in perfect working order.

Approximate Costs

As well as the size or volume of your system and the number of occupants in your household, clearance costs will vary from region to region and is often dependent upon the disposal rates charged by your local water authority. The costs below are for guide purposes only

Cesspit: (widely considered to be the most expensive sewage system to maintain)

Emptying Frequency:                      8 – 10 times per year, (often more frequently).

Average cost per empty:

1000 Gallons / 4500 Litres:            £110 – £130

2000 Gallons / 9000 Litres:            £170 – £200

3000 Gallons / 13500 Litres:          £220 – £260

4000 Gallons / 18000 Litres:          £280 – £320

Septic Tank: (generally considered the cheapest sewage system to maintain)

De-sludging Frequency:                 1 – 2 times per year.

Average cost per clearance:

1000 Gallons / 4500 Litres:            £110 – £130

2000 Gallons / 9000 Litres:            £170 – £200

3000 Gallons / 13500 Litres:          £220 – £260

4000 Gallons / 18000 Litres:          £280 – £320

Sewage Treatment Plant:

Maintenance frequency:              1 – 2 times per year.

Maintenance cost per visit:         £120 – £200

De-sludging Frequency:               1-2 times per year.

Average cost per clearance:

1000 Gallons / 4500 Litres:            £110 – £130

2000 Gallons / 9000 Litres:            £170 – £200

3000 Gallons / 13500 Litres:          £220 – £260

4000 Gallons / 18000 Litres:          £280 – £320

Electricity per year, (to run):          £150 – £250 (depends upon efficiency of STP and electricity rates)

Get In Touch With Us

  • Chartwell House
    5 Barnes Wallis Road
    Segensworth East
    PO15 5TT
  • 0800 023 5301
  • Send us a message
  • UK Spill Association
  • Safe Contractor Approved
  • DNV
  • Driver CPC
  • Chartered Institute of Waste Management
  • Investors in People

© 2013 Cleansing Service Group Ltd. All rights reserved.
Registered in England & Wales no. 530446. Registered office: Chartwell House, 5 Barnes Wallis Road, Segensworth East, Fareham, Hampshire PO15 5TT. VAT number: 369 9227 01.
Website by Something Digital.